Atlanta, Georgia, United States
Position: Equipment Technician for STS/Oxford/Plasmatherm
ClassOne Equipment is hiring for the position of a Dry Etch and Deposition Equipment Technician in our Atlanta, Georgia headquarters. This individual will be responsible for refurbishment of STS, Oxford and Plasmatherm plasma etch and deposition tools including but not limited to:
STS:
- Muliplex platform
- Pegasus platform
Oxford:
- PlasmaLab 80 platform
- PlasmaLab 100 platform
- PlasmaLab 800 platform
Plasmatherm:
- Shuttlelock platform
- Versalock platform
Below are the details for this position:
Primary Job Duties:
| |
- Repair and refurbish STS, Oxford and Plasmatherm equipment
- Field Service or OEM experience required
- Initial testing and diagnostic checks of equipment
- Perform electrical or mechanical troubleshooting to determine problems
- Perform Preventative Maintenance (dismantle, adjust, repair, and reassemble equipment)
- Perform equipment set-up changes, modifications, and upgrades
- Support equipment servicing activities in facility as needed
- Test RF generators on a 50 ohm test load with Bird Watt Meter to verify operation.
|
Required Skills:
| |
- Expertise on STS, Oxford and Plasmatherm plasma etch and deposition tools
- Thorough understanding of equipment failure fault finding on, Oxford and Plasmatherm plasma etch and deposition tools
- Leak Test vacuum systems after refurbishment to ensure vacuum integrity
- Familiarity with PC and PLC controlled systems
- Familiarity with Brooks robots and handlers
- Strong work ethic, self-motivated
- Meticulous and quality focused
- Ability to multitask and work with minimal supervision
- Keep detailed notes of accomplishments and tasks
|
Minimum Requirements:
| |
- At least 3-4 years experience in similar position
- Computer literacy and experience with MS Word and Excel required
- Must be able to work overtime when required
- Permanent legal resident status is required
|
Other information:
