Semitool Raider M Electroless Ni Plater
SEMITOOL RAIDER M ELECTROLESS PLATING SYSTEM consisting of:
- Model: Raider M
- Process: Electroless Ni Plater
- Configured for 200mm and 300mm wafers
- Rotors included: 1 set 200mm, 1 set 300mm rotors
- 2 Chamber Electroless Plating
- Insitu Rinse on both Chambers
- 2 Incoming Chemical hookups
- PH Probes on each Chamber
- Semitool 502 Controller
- 4" PFA Filters per Chamber
- Levitronixs Recirc Pumps
- Fire Suppression System
- Process Exhaust
- Hot DI hookup
- CDA hookup
- N2 hookup
- DI hookup
- 2 Bath Recovery Drains
- 2 Chemical Drains
- IW Drain
- Sample Ports for Chemicals 1 and 2
- Light Tower
- Power requirements: 3-Phase 208V (5 wire) 30amp
- Serial Number: T238994
- Manufactured in 2006!
- Like-New Condition (barely used and in absolute like-new condition!)
- Operation Manuals (complete set)
- Refurbished by ClassOne Semitool Factory Trained Technicians
- Installation, Training, and Support Provided Worldwide
Note: pictured above is one Semitool Raider Electroless Plater and one Raider Pre-Clean System. These two systems can be purchased either together or individually. This listing is for the Electroless Plater. For info on the Raider Pre-Clean system please see listing for ID: 2955 on our website.
2006
Excellent Condition Guaranteed.
Refurbished by Former Semitool Factory Trained Technician.
Available for Full Inspection and Demonstration at ClassOne Equipment.
3 Month Warranty and Full Specification Guarantee.
30 Day Right of Return.
6-8 weeks
