Suss MicroTec MJB4 Mask Aligner

SUSS MICROTEC MJB4 MASK ALIGNER consisting of:
- Model: MJB4 - Manufacturer: Suss MicroTec - Serial Number: 105 - Manufacture Date: 2008 - Configured for Top Alignment - Wafer Size: Small Pieces up to 4"/100mm Diameter Wafers (requires proper chuck) - Exposure Modes: Hard, Soft, and Vacuum (requires proper tooling) - Suss Single Field Microscope - 5x,10x, 20x Objectives (1 set) - 350 Watt Lamphouse - UV400 Optics (for 365nm and 405nm exposure) - Suss CIC 1200 Power Supply - Vacuum Chuck - Maskholder - Vibration Isolation Table Included - Operations Manual for Suss MJB4 Mask Aligner
CLASSONE'S MASK ALIGNER REFURBISHMENT PROCESS consists of:
1) Main System Body: - Ellipsoidal Mirror Replaced with New - UV Bulb Replaced with New - Cold Light Mirror Inspected & Replaced as Needed - Front Turning Mirror Inspected & Replaced as Needed - Front Lens Inspected & Replaced as Needed - Shutter Cylinders Replaced with New - Mirror House Cylinder Replaced as Needed - Lamp Power Supply Tested & Repaired or Replaced as Needed - Exposure Optics Tested - Microscope Illumination Bulbs Replaced with New - Microscope Assembly Inspected and Adjusted as Needed - Full Optical Alignment of Microscope Performed as Needed - Machine is Fully Tested to Verify Compliance to Original Specifications - WEC Head Rebuilt - Pneumatic Regulators Inspected & Replaced as Needed - Machine Covers are Repainted or Replaced as Needed
2) Isolation Table: - Isolation Table Air Bags Inspected & Replaced as Needed - Pneumatic Regulators Inspected & Replaced as Needed - Air lines Inspected & Replaced as Needed - Wheels Inspected & Replaced as Needed - Leveling Feet Inspected & Replaced as Needed
3) If Applicable: - Transport Slide Rebuilt - Pre-Aligner Assembly Rebuilt - Wafer Alignment Stage Rebuilt - Cassette Elevator Rebuilt